Posts

Sun and moon wall art collection

Introducing my new collection of sun and moon wall art. These celestial pieces are great for those who like whimsical decor, inspirational art, spiritual art, new age art, nursery rhymes art, baby nursery decor, beach house art and mixed media assemblage, just to name a few.

All are hand painted with my original designs on 5 inch round wooden plaques with a sawtooth hanger on the back. And, of course, they’re all blinged out because I’m all about the bling. Each one has its own personality, so let’s take a look at them.

Moon wall art (sculptures, wall hangings, plaques)

Dream Moon

full moon painting plaque

Dream Moon wall art by Lynda Makara

A classic full moon painted mostly white with silver metallic accents and the word “dream” written on her face. There are three little stars on one cheek with a crystal inside of each.

full moon painting plaque

The sides are adorned with AB crystals.

full moon painting plaque

Blue Moon

blue moon painting plaque

Blue Moon wall art by Lynda Makara

Blue moons are usually rare but you can enjoy this one every day. Painted blue with a glowing white center, she has a sweet expression as she looks up at the heavens. She also has three silver stars on her face with crystals inside.

blue moon painting plaque

The sides are painted blue with matching blue glitter and crystals on top.

blue moon painting plaque

Sun wall art (sculptures, assemblage, wall hangings, plaques)

Sun Ray

sun assemblage painting plaque

Sun Ray wall art by Lynda Makara

My Sun Ray plaque is painted orange blending into yellow with blue accents. The intricately painted face is adorned with crystals in the eyes and on the triangles.

sun assemblage painting plaque

The sun’s rays are represented by nails going around the outside.

sun assemblage painting plaque

Spiky Sun

sun assemblage painting plaque

Spiky Sun wall art by Lynda Makara

This Spiky Sun is bright yellow with a lighter yellow and white center. The eyes are outlined with crystals.

sun assemblage painting plaque

The sun’s rays are made with metal spikes and screws all around the outside.

sun assemblage painting plaque

The celestial sun and moon wall art collection

These pieces are fantastic individually or in groupings as you can see in the pictures below.

sun and moon wall art

moon wall art and sun assemblage painting plaque

Available in my etsy shop.

Sleepy Moon wall art paper clay tutorial

paperclay moon10 I’m obsessed with the full moon and intrigued by the different faces you can see in it.

This time I saw a dreamy woman’s face with a quirky little mouth. She was the inspiration for my website’s header and also my Sleepy Moon wall art, a paperclay sculpture surrounded by shimmering moonbeams.

Follow along with me as I show you step by step how this sculpture was made.

Preparing to sculpt

I used a 10¼” paper maché plate for the foundation of the sculpture. Then I cut out a piece of cardboard slightly smaller than the plate to be used as a backing.

paperclay moon base and backing

Paper mache plate and cardboard backing

I made a full size drawing of the moon face.

paperclay moon sketch

Sleepy Moon by Lynda Makara

Then I traced the drawing onto a piece of wax paper. This was used to overlay my sculpture to check for accuracy in the placement of the features.

drawing on wax paper of sleepy moon wall art

Wax paper drawing of Sleepy Moon by Lynda Makara

Working on the sculpture

The easy part was covering the plate with a layer of clay. I always use Creative Paperclay.

first layer of paperclay for moon wall art sculpture

Paperclay over paper mache plate

I laid the wax paper over the clay. With my X-acto knife I punched little holes through the paper along the black lines.

using wax paper drawing to mark paperclay sculpture

Wax paper over paperclay base to make markings

This shows the markings left behind after removing the wax paper. The clay was divided into four sections with the nose outlined.

Marks made through wax paper drawing on paperclay moon

Marks made through wax paper drawing

To make the nose I just started with a nice nose-shaped blob of clay.

adding a nose to the paperclay moon sculpture

Adding a nose to the moon

I added a smaller ball for the nostrils.

adding to the nose on paperclay moon

Adding to the nose

With the nose done, I starting working on the eyes. I cut out a layer of clay in the shape of the eye using the pattern as a guide.

Nose added to moon sculpture, working on right eye

Nose added, working on right eye

The eyes had slits for the eyelashes to be glued into later. The eyebrows were marked at this point.

Both eyes done on moon sculpture, marks for eyebrows

Both eyes added and marks made for eyebrows

One eyebrow done.

right eyebrow finished on moon sculpture

Right eyebrow finished

After the eyes and eyebrows were finished, I let the paperclay dry overnight. The next day I pulled off a piece of clay and formed it into the approximate shape of the mouth.

moon sculpture with eyebrows, piece added for mouth

Both eyebrows done, piece added for mouth

I used a small dampened paintbrush to smooth out areas too small for my fingers. My X-acto knife helped with carving and shaping.

working on the mouth for moon sculpture

Working on the mouth

Here it is after the facial features were done and left to dry for a few hours.

Moon with facial features done

Facial features done

Then I came back in with thin layers of clay to make craters. I also filled in all the cracks that appear after drying and the remaining guide marks.

Some tools I used to make the craters: the end of my knife, wooden dowels, my knuckle.

adding crates to moon sculpture

Adding craters to moon

After the sculpture dried overnight, I shaped and refined the features using the knife. I also added a bit more clay to the nose.

This is what it looked like when I was done sculpting. Very close to the original drawing.

Comparing the finished moon sculpture to the drawing

Comparing the finished sculpture to the drawing

Another view of the sculpture ready to be painted.

Paperclay moon before painting

Paperclay moon before painting

Painting the moon sculpture

I always like to define the features first by using a black wash. The clay is porous and using watery paint helps cover everything.

adding black wash to moon sculpture

Adding black wash to moon sculpture

With this sculpture I worked from dark to light. Black wash in the crevices, gray wash over everything else.

Then I went back in dry brushing with white paint. Many layers were added.

I do drybrushing instead of regular painting because it blends in better with the background colors, almost like airbrushing.

At the end I drybrushed metallic silver paint as a highlight.

Highlighting moon sculpture with metallic silver paint

Highlighting with metallic silver paint

Working on the embellishments

I cut out a pair of eyelashes from a piece of thin cardboard. They got painted black on both sides.

Cardboard eyelashes for moon

Cardboard eyelashes for moon

Not being able to find ready made trim, I made my own tinsel from a mylar ham wrapper. This was the outer wrapper not against the ham.

I cut strips of mylar layered over a piece of tulle, sewed them together with a gathering stitch, cut them apart and fringed the edges.

This detail represents a moon ring and also serves to soften the transition between the moon and the backing.

Working on the backing

I took the cardboard backing and divided it into 16 equal parts. This was easily accomplished marking from a paper circle folded into 16 sections.

Each line marks the spot for a dowel to be glued.

dividing cardboard backing into 16 equal parts for moon wall art

Dividing cardboard backing into 16 equal parts

Lines were drawn with a ruler.

drawing lines on cardboard backing for moon wall art

Drawing lines on cardboard backing

Dowels were glued in place with hot glue.

Gluing dowels to cardboard backing

Gluing dowels to cardboard

Bamboo skewers were glued in between the dowels. I just eyeballed the placement of these.

Gluing skewers to cardboard backing

Gluing skewers to cardboard

Then I made a wire hanger from 22 gauge wire, folded in half and twisted.

Making wire hanger for moon sculpture

Making wire hanger for sculpture

The twisted wire was inserted near the edge over a dowel. The ends were twisted together and glued in place on both sides.

Wire hanger going through cardboard backing

Wire hanger going through cardboard backing

I painted the sticks with metallic silver.

painting sticks for moon sculpture

Painting the sticks metallic silver

The back was painted black.

cardboard backing painted black for moon sculpture

Backside painted black with hanger in center

Mirrors were glued on with hot glue. Afterwards I put more glue on the back of them and covered with silver paper.

Gluing mirrors to sticks to create moonbeams

Gluing mirrors to sticks

Layers of cardboard were glued in the center of the base to reach the depth of the paper maché plate.

Cardboard added to center of moon backing

Cardboard added to the center

Gluing everything together

Cardboard eyelashes were glued into the slit. This almost looks like gluing regular eyelashes!

Gluing eyelashes to moon sculpture

Gluing eyelashes to moon sculpture

Tinsel was gathered and glued around the edge of the moon on the underside.

Tinsel glued to moon sculpture

Tinsel glued to moon sculpture

Finally the moon sculpture was glued to the backing using tacky glue. I held it in place with pressure on it for about 20 minutes. I didn’t want to crush the eyelashes by placing something heavy on top!

Gluing the mirrored backing to moon sculpture

Gluing the mirrored backing to moon sculpture

Finishing touches

I decided to lighten up the eyebrows then I went over everything with satin varnish. After that dried I applied two different kinds of iridescent glitter in strategic places: inside craters, on the eyes, eyelashes and mouth.

This step I like to think of as painting with glitter.

paperclay moon closeup

Sleepy Moon with glitter embellishments

Introducing the Sleepy Moon!

Here she is in all her glittering glory!

Sleepy Moon wall art paperclay sculpture

Sleepy Moon wall art

For more photos, check her out here.

Related projects

Muse in the Moon sculpture
Starburst mirror

Making a moon art sculpture with paper clay

lady moon art sculpture

Muse in the Moon by Lynda Makara

This tutorial shows how I made a heavenly crescent moon art sculpture for a client using paper clay, simple craft supplies and common household items. The techniques I share can be used to create sculptures in different shapes and sizes.

You’ll see step by step how the project progressed from the initial sketch to creating a foundation, building the moon sculpture in layers and then painting it.

Supplies for the moon sculpture

supplies for moon art sculpture

Supplies for moon art sculpture

These are the things I used for this project:

  • Creative Paperclay
  • Corrugated cardboard and heavy paper
  • Wire: tie wire, 22 and 24 gauge dark annealed wire
  • Glue: hot glue and Aleene’s Tacky Glue
  • Wire cutters and needlenose pliers
  • Scissors
  • X-acto knife
  • Fine grit sandpaper
  • Paint and brushes
  • Satin varnish

The moon sculpture starts with a sketch

sketch of Muse in the Moon by Lynda Makara

Sketch of Muse in the Moon by Lynda Makara

Whenever I’m making a sculpture, I often start with a sketch. Because this was a commissioned piece, my client had to approve the sketch.

She wanted a woman in the moon with a knowing look, dainty features and real eyelashes. And she wanted to be able to hang it from the ceiling.

The dimensions for the sculpture are 9″ in diameter and 2″ in width. I actually took a 9″ paper plate to trace the outline for this full size drawing.

Paper patterns made from the sketch

paper pattern for moon sculpture

Paper pattern for moon sculpture

I wanted to keep the original sketch intact so I traced it onto heavy paper, cut it out, then made another smaller piece to use as a template for cutting cardboard in the next step.

Making the foundation out of cardboard cutouts of the moon

cardboard foundation for moon sculpture

Cardboard foundation for moon sculpture

Every sculpture needs a foundation to make it sturdy and to use less clay. For a piece of this size I like to use corrugated cardboard from old shipping boxes. You most likely have a few lying around if you happen to do any online shopping.

The thickness of the cardboard makes the shape bulk up faster. I cut out six pairs of moon shapes but only ended up using five. Each layer was a little smaller than the last. The layers get glued together.

Using wire to create a hanger and add support: tie wire and 22 gauge wire

embedding wire hanger inside sculpture

Embedding wire hanger inside sculpture

I use tie wire a lot in my artwork because it’s strong but not too hard to bend.

Here it’s being used to make a hanger that the moon will be suspended from. I wanted to embed it into the center to make sure it would stay in there forever and not get pulled out. I also wanted to reinforce the crescent tip.

Then I cut a piece of 22 gauge wire to bind the tie wire at a certain point, shown in the next step.

Wrapping the wire hanger with 22 gauge wire

securing the wire hanger

Securing the wire hanger

I used this 22 gauge wire to bind the tie wire together at the point where it would project out.

The tie wire started at the crescent tip, went down toward the middle, then came back up near the top.

Gluing the layers together using hot glue and tacky glue

Wire used to reinforce the ends: 24 gauge wire

wire for reinforcing cardboard frame

Wire for reinforcing cardboard frame

Dark annealed 24 gauge wire is strong but bends easily around shapes.

Wrapping the ends with 24 gauge wire

wrapping ends with wire

I wanted to reinforce the ends with wire because they were going to be so thin. I wrapped in one direction, from left to right, then back the other way.

Finishing the wire wrapping

wrapping ends with wire

To finish wrapping, the ends of the wire were twisted under in little loops then secured with hot glue.

Both ends wrapped with wire

both ends wire wrapped

Both ends wire wrapped

Comparing the wire wrapped cardboard form with the paper pattern. So far so good.

Wrapping the cardboard moon with strips of paper

wrapping cardboard form with paper

Wrapping cardboard form with paper

Strips of wet paper were wrapped around the cardboard and secured with a little tacky glue. I wanted to cover the crevices to be able to use less clay.

cardboard moon wrapped with paper

Cardboard moon wrapped with paper

After wrapping with paper, I let this dry for a little bit before covering with clay.

Tip #1: Keep it fresh

When working with clay, pull out a small piece at a time and leave the rest in an airtight container or plastic bag

Covering the cardboard form with clay

covering the cardboard form with clay

Covering the cardboard form with clay

Here I’m using sheets of clay that were pressed out with my fingers to achieve a somewhat lumpy texture for the moon.

Tip #2: Keep water on hand

Use water to blend pieces together

Carving the fresh clay

carving wet clay

carving wet clay

Paper clay can be carved wet or dry. Here I’m using my knife to thin this section.

Cardboard form covered with first layer of clay

first layer of clay applied to cardboard moon form

First layer of clay applied to cardboard moon form

I let this harden overnight.

Tip #3: Bake it

If you’re in a hurry, you can speed up the drying process by placing the piece in a 200 degree oven for a couple of hours.

Second layer of clay with more texture added

second layer of clay with more texture

Second layer of clay with more texture

The second layer has a lot of bumps and craters scattered about.

Adding craters to the moon sculpture

adding craters to the moon

Adding craters to the moon

I used different sized dowels to make the craters while the clay was fresh. The one in this photo is a 1/4″ dowel.

Nose added to moon face

nose added to moon face

Nose added to moon face

I added a rectangular blob for the nose and blended it onto the dried clay. You can see the wet part is darker than the rest of the moon.

I shaped it with my fingers until it matched the shape of the nose on the paper pattern. Then I used a small rounded dowel to define the sides of the nose and make nostril impressions. The end of a small paintbrush would also work.

I did one feature at a time and let it dry to avoid messing up what I had just finished.

Adding the mouth

adding the mouth

Adding the mouth

To make the mouth I rolled out a small clay snake the length of the mouth. I used my knife to shape and blend it in. Then I used the knife to separate the shape into two lips.

Front view of moon face with nose and mouth

front view of moon face with nose and mouth

Front view of moon face with nose and mouth

In this photo you can see more of the details in the nose and mouth.

Moon face with cheeks added

moon face with cheeks added

Moon face with cheeks added

To make the cheeks I rolled a small ball of clay, flattened it out a little and blended it in. It took a bit of time to make sure both sides were even.

Moon sculpture with eyes added

moon face with eyes added

Moon face with eyes added

Just before I did the eyes, my client decided she wanted them closed.

I used a small ball of clay for the eyes. I added a snake above them for the eyebrows. I blended everything in and made the eyelid crease by pressing in with my fingers. Then I cut a groove into the lid for the eyelashes to be added afterwards.

Template for the closed eye

closed eye template

Closed eye template

I drew this template on wax paper and used it as a guide to make sure the eyes were the same on both sides.

Front view of moon face before sanding

front view of moon face

Front view of moon face

Here is the moon with all the major sculpting completed.

After this picture was taken, I used my X-acto knife to refine the features and fine sandpaper to smooth the surface. The texture goes from smooth in the center to increasingly craggy the further it gets from the face.

Tip #4: Save your clay

Clay can be reused even after it’s dried. Put discarded chunks back in the container/bag along with a little water. It will soften up again.

Sanded face ready to paint

Painting and finishing touches for the moon sculpture. Colors used: true blue, cobalt blue and white.

Project completed. Meet the Muse in the Moon!

lady moon sculpture by Lynda Makara

Lady moon sculpture by Lynda Makara

My client was delighted!

Want me to make something special for you? You can get in touch with me through the Contact button at the top of the page.

The Muse in the Moon from different angles

More of my paper clay creations to inspire you

Related project

Sleepy Moon paper clay tutorial